100 Ton Hydraulic H-Frame Press

100 Ton H-Frame Press

(FP 0100 Series)

• Cylinder workhead glides across upper frame on rollers, locks in place for offcenter pressing jobs. May be used
horizontally for special pressing applications with user-supplied supports.
• Press bed is raised and lowered by winch which locks in place for insertion of bed retaining pins. Upper bolster
can be lowered 8″ for convenient positioning on repetitive jobs.
• Generous “daylight” of 42″ x 50″ accommodates bulky work pieces, uprights are placed for easy side entry of
bars or shafts for straightening or bending.
• Choice of single- or double-acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 2-gallon reservoir, PE172 electric/hydraulic pump or “PQ” series
“Quiet” electric/hydraulic pump with low noise level.

Category:

Description

Capacity

Type of

Stroke

Speed

(in./min.)++

Pump

Valve

Prod. Wt.

Order

(tons)+

Cylinder

Advance

Pressing

Type

Type

(lbs.)

Number
     

100

Single-Acting

10 1/4 "

.356 in./stroke

.01 in./stroke

Hand

3-way

1,698

FP 0100-1

100

Single-Acting

10 1/4 "

35

2.9

Elec.

3-way

1,795

FP 0100-2

100

Single-Acting

10 1/4 "

11.5

.8

Elec.

2-way

1,690

FP 0100-3

100

Double-Acting

10 1/4 "

35

5.8

Elec.

4-way*

1,886

FP 0100-4
 * Solenoid valve with 24 volt remote control hand switch
+ Frame is shipped assembled
++ Typical performance based on 100 psi and 10,000 psi pump specifications.  Actual speeds may vary with operating conditions.
dBA at idle and 10,000 psi: PE172-67/81;PQ120-73/78 Measured at 3 foot distance, all sides.

 

Related products