CONTACT US
(614)850-8940
4299 Reynolds Dr
Hilliard, OH 43026

REQUEST A QUOTE

HOME

Hydraulic Roll-Bed Presses® 80-200 Ton H-Frame

HYDRAULIC ROLL-BED PRESSES® 80-200 TON H-FRAME

  • The original, patented Roll-Bed® design. Bed rolls out for easy loading and unloading with a crane or other lifting device.
  • Roll-Bed® press is designed so that the bed glides in or out on bearings to make loading and unloading fast and easy.
  • Adjustable lower bed width. For secure balancing and centering of heavy jobs. Loosen adjusting bolts to adjust bed from 4” to more than 27”. See dimension “H”.
  • Moveable workhead for off –center pressing jobs, workhead moves on bearings across upper bolster. Presses can be used at full capacity, regardless of where workhead is placed.
  • Lifting mechanism – Simply turn crank handle to raise or lower upper bolster. Screw mechanism raises or lowers both sides evenly (a heavy duty ½” drill motor can replace handle for automatic adjustment). Four locking pins hold bolster in place for pressing.
  • Optional heavy-duty straightening fixtures make straightening jobs easy and accurate to within 0.004”. Rollers are ball bearing mounted and handle raises or lowers for easy turning of the work.
View our example H-Frame gallery!

PUMP ELECTRICAL SPECIFICATIONS
PQ120 Series – 3 hp. 460 volt, 60 cycle, three phase. Also available in 220/380 volt, 50 cycle.

Hydraulic Roll-Bed Presses80-200 Ton H-Frame Roll-Bed Hydraulic Press ManufacturersHydraulic Roll-Bed Presses 80-200 Ton H-FrameHydraulic Roll-Bed Presses 80-200 Ton H-FrameRoll-Bed Hydraulic Press 80-200 Ton H-Frame

DIMENSIONS
Cap. Tons A B C D E F G H J K L M Floor Space
80 112 ⅝” 64 ¼” 50 ½” 27” 12” – 60” 14 ½” – 36” 3” 4” – 27 ¼” 8” 36 ½” 3 ⅜” 15” 64 ¼” × 60 ½”
100 112 ⅝” 64 ¼” 50 ½” 27” 12” – 60” 14 ½” – 36” 3” 4” – 27 ¼” 8” 36 ½” 3 ⅜” 15” 64 ¼” × 60 ½”
150 123 ¼” 68 ¼” 51 ¼” 30” 9” – 64” 13 ⅞” – 37 ⅜” 3” 4” – 27 ¼” 11” 37 ¼” 4 ⅛” 18” 68 ¼” × 63 ¼”
200 123 ¼” 68 ¼” 51 ¼” 30” 9” – 64” 15 ⅛” – 36 ⅛” 3” 4” – 27 ¼” 11” 37 ¼” 4 ⅛” 18” 68 ¼” × 63 ¼”
ORDERING INFORMATION
SPX Part # Cylinder # Cylinder Type Cap. (Tons)† Stroke Pump # Pump Type‡ Valve Type Advance (IPM)†† Pressing (IPM)†† Weight
RB8013S RD8013S Double-Acting 80 13 ⅛” PQ1204S Electric 4-Way* 46.0” 7.5” 2,886 lbs
RB10013S RD10013S Double-Acting 100 13 ⅛” PQ1204S Electric 4-Way* 35.0” 5.8” 2,944 lbs
RB15013S RD15013S Double-Acting 150 13 ⅛” PQ1204S Electric 4-Way* 24.0” 3.9” 4,458 lbs
RB20013S RD20013S Double-Acting 200 13 ⅛” PQ1204S Electric 4-Way* 18.0” 2.9” 4,546 lbs

†† Typical performance based on 100 psi and 10,000 psi pump specifications.  Actual speeds may vary with operating conditions.  3,000 lb maximum load that can supported on bed when raised on the rollers.
‡ Pump standard with press.  Other Power Team pumps can be substituted.
* Pre-wired at factory for 460V.