H-Frame 55 Ton Presses

Full off-center pressing at full rated capacity across the width of the upper frame without buckling or bending.
Maximum “daylight” is 42” × 36”, making positioning of even bulky work pieces easy.
Height of press bed is easily adjusted winch; friction brake prevents bed from dropping and handle from spinning upon release.

Presses with single-acting cylinder offer choice of 2-speed hand operated, electric/hydraulic, or air/hydraulic.
Press models equipped with remote control, enable the operator to view the work from all sided with fingertip control of cylinder piston travel.

Press can be used horizontally for special applications with user-supplied legs.

PUMP ELECTRICAL SPECIFICATIONS
PE17 Series – ½ hp, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PE21 Series – 1 hp, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PQ60 Series – 2 hp, 230 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
[/row_fluid]

55 Ton H-Frame Hydraulic Press55 Ton H-Frame Hydraulic Press55 Ton H-Frame Hydraulic Press55 Ton H-Frame Hydraulic Press
DIMENSIONS
A B C D E F G H J L M Floor Space
72” 48 ½” 36” 3 ¼” – 32 ¾” 6” – 42” 6” 36” 6 ¾” 8” 3” 12” 48 ½” × 36”

*Lateral head movement

ORDERING INFORMATION
SPX Part # Cylinder # Cylinder Type Cap. (Tons) Stroke Pump #‡ Pump Type Valve Type Advance (IPM)††† Pressing (IPM)††† Weight
SPA556 C556C Single-Acting 55 6 ¼” PA6 Air 2-Way Foot 4.5” 0.5” 804 lbs
SPM556 C556C Single-Acting 55 6 ¼” P159 Hand Load-Release 0.23 in./stroke 0.015 in./stroke 814 lbs
SPM5513 CC5513C Single-Acting 55 13 ¼” P460 Hand 2-Way 0.665 in./stroke 0.026 in./stroke 960 lbs
SPE556 C556C Single-Acting 55 6 ¼” PE172 Electric 2-Way†† 21.7” 1.5” 836 lbs
SPE5513 CC5513C Single-Acting 55 13 ¼” PE172 Electric 2-Way†† 21.7” 1.5” 980 lbs
SPE5513S CC5513C Single-Acting 55 13 ¼” PE213S Electric 3-Way† 24.4” 1.9” 1,056 lbs
SPE5513D RD5513 Double-Acting 55 13 ¼” PE174 Electric 4-Way 21.7” 1.5” 993 lbs
SPE5513DS RD5513 Double-Acting 55 13 ¼” PQ604S Electric 4-Way† 66.1” 5.4” 1,114 lbs

† Solenoid valve with 24 volt remote control hand switch.
†† Holds pressure with motor off.  Also has an automatic dump setting.  Furnished with a 10’ remote motor control
††† Typical performance based on 100 psi and 10,000 psi pump specifications.  Actual speeds may vary with operating conditions.