H-FRAME 25 TON OPEN THROAT® & ECONOMY PRESSES
OPEN THROAT® PRESSES
Design permits use as both “H” frame and “C” frame press; cylinder can be mounted on frame extension to handle jobs which won’t fit between uprights.
Open Throat press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel.
Off-center pressing loads of full capacity can be applied across entire width of frame.
ECONOMY PRESSES
Rugged, yet reasonably priced. Handles many “big press” tasks, and perfect for many of the “in-between” jobs you see almost daily.
FEATURES OF BOTH OPEN THROAT® PRESSES & ECONOMY PRESSES
Press bed height easily adjustable with winch. Bed will not drop when handle is released.
Choice of power sources for rapid cylinder advance; two-speed hydraulic hand pump, electric/hydraulic, or air/hydraulic.
PUMP ELECTRICAL SPECIFICATIONS
PE17 Series – ½ hp, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PE21 Series – 1 hp, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
Open Throat™ features enable cylinder to be mounted on outside of press frame for fast bearing removal & more.
| DIMENSIONS | ||||||||||||
| A | B | C | D* | E | F | G | H | J | K | L | M | Floor Space |
| 68” | 43” | 28” | 3” – 29” | 6 ⅞” – 43 ⅜” | 4 ½” | 32” | 5 ½” | 6 ½” | 7” | 2 ½” | 8” | 43” × 28” |
*Lateral head movement
| DIMENSIONS | |||||||||||
| ORDERING INFORMATION | |||||||||||
| SPX Part # | Model | Cylinder # | Cylinder Type | Cap. (Tons) | Stroke | Pump #‡ | Pump Type | Valve Type | Advance (IPM)††† | Pressing (IPM)††† | Weight |
| SPA2514 | Open Throat® | C2514C | Single-Acting | 25 | 14 ¼” | PA6 | Air | 2-Way Foot | 9.8” | 1.2” | 683 lbs |
| SPM2514 | Open Throat® | C2514C | Single-Acting | 25 | 14 ¼” | P159 | Hand | Load-Release | 0.49 in./stroke | 0.03 in./stroke | 693 lbs |
| SPE2514 | Open Throat® | C2514C | Single-Acting | 25 | 14 ¼” | PE172 | Electric | 2-Way†† | 46.6” | 3.3” | 665 lbs |
| SPE2514S | Open Throat® | C2514C | Single-Acting | 25 | 14 ¼” | PE213S | Electric | 3-Way† | 52.0” | 4.0” | 759 lbs |
| SPE2514DS | Open Throat® | RD2514 | Double-Acting | 25 | 14 ¼” | PE214S | Electric | 4-Way† | 52.0” | 4.0” | 787 lbs |
| SPA256 | Economy | C2566C | Single-Acting | 25 | 6 ¼” | PA6 | Air | 2-Way Foot | 9.8” | 1.2” | 578 lbs |
| SPM256 | Economy | C2566C | Single-Acting | 25 | 6 ¼” | P59 | Hand | Load-Release | 0.129 in./stroke | 0.129 in/stroke | 595 lbs |
| SPE256 | Economy | C2566C | Single-Acting | 25 | 6 ¼” | PE172 | Electric | 2-Way †† | 46.6” | 3.3” | 607 lbs |
† Solenoid valve with 24 volt remote control hand switch.
†† Holds pressure with motor off. Also has an automatic dump setting. Furnished with a 10’ remote motor control
††† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary with operating conditions.