Press bed is raised and lowered by winch witch locks in place for insertion of bed retaining pins. Upper bolster can be lowered 8” for convenient positioning on repetitive jobs.
Generous “daylight” of 42” × 50” accommodates bulky work pieces, uprights are placed for easy side entry of bars and shafts for straightening or bending.
Choice of single or double-acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 2-gallon reservoir, PE172 electric/hydraulic pump or “PQ” series “Quiet” electric pump with low noise level.
PUMP ELECTRICAL SPECIFICATIONS
PE17 Series – ½ hp, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PQ60 Series – 2 hp, 230 volt, 60 cycle, single phase. For 115 volt consult factory.
PQ1200 Series – 3 hp, 4600 volt, 60 cycle, three phase. Also available in 220/380 volt, 50 cycle.
[/row_fluid]
[row_fluid]
[/row_fluid]
[row_fluid]
DIMENSIONS | |||||||||||
A | B | C | D* | E | F | G | H | J | L | M | Floor Space |
77 ¼” | 64” | 36” | 7” – 43” | 2” – 42” | 8” | 50” | 8” | 10” | 3 ⅜” | 15” | 36” × 78 ¼” |
* Lateral head movement
ORDERING INFORMATION | ||||||||||||||||||||||||||||||||||
SPX Part # | Cylinder # | Cylinder Type | Cap. (Tons)† | Stroke | Pump #‡ | Pump Type | Valve Type | Advance (IPM)†† | Pressing (IPM)†† | Weight | ||||||||||||||||||||||||
SPM10010 | C10010C | Single-Acting | 100 | 10 ¼” | P460 | Hand | 3-Way | 0.356 in./stroke | 0.01 in./stroke | 1,698 lbs | ||||||||||||||||||||||||
SPE10010 | C10010C | Single-Acting | 100 | 10 ¼” | PQ603 | Electric | 3-Way | 35.0” | 2.9” | 1,795 lbs | ||||||||||||||||||||||||
SPE10010R | C10010C | Single-Acting | 100 | 10 ¼” | PE172 | Electric | 2-Way | 11.5” | 0.8” | 1,690 lbs | ||||||||||||||||||||||||
SPE10013DS | RD10013 | Double-Acting | 100 | 13 ⅛” | PQ1204s | Electric | 4-Way* | 35.0” | 5.8” | 1,886 lbs |
† Frame is shipped assembled. *Solenoid valve with 24 volt remote control hand switch.
†† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary with operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted.
dBa at idle and 10,000 psi: PE172 – 67/81; PQ60 – 74/76; PQ120 – 73/78. Measured at 3 foot distance, all sides.
[/row_fluid]