C-Frame Floor

5 Through 200 Tons

(Higher tonnages available on request)

These versatile presses bring hydraulic precision and control to most press-room applications, including punching, blanking, coining, forming, bending, drawing, and assembly work. Phoenix presses are well-known for heavy rigid frame construction, and for the use of standard, locally available hydraulic and electrical components that cut down on maintenance cost and downtime.

For dependable, affordable performance, Phoenix Hydraulics is the smart choice in hydraulic presses.

Open Gap Frame Press (OGF Press) Hydraulic Sales & Service at Phoenix Hydraulic

Standard Features

Capacity:
Tonnage is adjustable from approx. 20% to 100% of maximum rating. Lower ranges of operation are available upon request.

General Construction:
The press is of all-steel construction, welded for maximum strength & stability & minimum deflection. For long life, all cylinder rods are hardened, ground, and hard chrome plated to resist scratching & scoring. Large reservoirs are an integral part of the frame, eliminating the need for a heat exchanger an most single pump applications.

Hydraulic Components:
Cylinder, pumps, & valves meet JIC Standards. Valves with indicator lights are used & the hydraulic circuit is designed to counter act the tendency of the ram to drift down. The pump is a fixed volume vane type and is a C Face mounted to the electric motor.

Electrical Components:
Includes controls to JIC Standards, TEFC Motor, NEMA 12 control cabinets (dust-proof & oil tight), indicator lights, magnetic starter, 110 volt transformer & terminal block. Operating voltage is 230/460 volts, 3 phase, 60 hertz, unless otherwise specified.

Sound Level:
When factory tested prior to shipment, presses have a decibel level rating under 85dB at the operator’s position.

Manuals:
Operating & maintenance manuals and drawings are furnished as part of every press order

Hydraulic Fluid:
Uses standard hydraulic fluid, Mobil DTE-26 or equal. Phosphate ester (fire resistant), water/glycol or other fluids, must be specified. Presses are factory tested & reservoir drained prior to shipment. Selling price does not include hydraulic fluid.

View our example C-Frame Floor gallery!

Dimensional Data

C-Frame Open Gap Frame Hydraulic Press (OGF Press) Drawing

SPECIFICATIONS

    Press Model Number:                                                                                 OGF-5 OGF-8 OGF-12 OGF-20 OGF-30 OGF-40 OGF-50 OGF-75 OGF-100 OGF-150 OGF-200
DIM KEY     Capacity in Tons (Maximum): 5 8 12 20 30 40 50 75 100 150 200
Operating Pressure (Maximum PSI): 2040 1925 1910 2040 2120 2078 1990 1910 2550 2660 2610
A Ram Centerline to Frame: (Reach): 8” 8” 10” 12” 12” 15” 15” 18” 18” 18” 18”
B Table to Ram – Ram Up (Daylight): 18” 18” 24” 24” 24” 30” 30” 32” 32” 36” 36”
C Stroke of Cylinder (Stroke): 12” 12” 18” 18” 18” 24” 24” 24” 24” 24” 24”
D Table Length – Left to Right: 18” 22” 22” 24” 24” 30” 30” 32” 32” 36” 36”
E Table Length – Front to Back: 14 ½” 14 ½” 17 ½” 20 ½” 20 ½” 27” 27” 29” 29” 29” 29”
F Table Thickness: 2” 2” 2” 2 ½” 2 ½” 2 ¾” 3” 3 ¾” 4” 4” 4”
G Table to Floor: 36” 36” 36” 36” 36” 32” 32” 32” 32” 32” 32”
H Width of “U” Slot or Hole Diameter: 2 ½” 2 ½” 2 ½” 2 ½” 2 ½” 4” 4” 5” 6” 6” 6”
  Cylinder & Ram
J Cylinder Bore: 2 ½” 3 ¼” 4” 5” 6” 7” 8” 10” 10” 12” 14”
K Diameter of ram: 1 ¾” 2” 2 ½” 3 ½” 4” 5” 5 ½” 7” 7” 8 ½” 10”
L Dia. of Ram End ( +0.00 – 0.04) Ram Ends (A) & (B): 1.500” 1.750” 2.250” 3.249” 3.749” 4.749” 5.249” 6.750” 6.750” 8.250” 9.750”
M Dia. of Ram Holes ( +0.00 – 0.04) Ram End (A): 0.876” 0.876” 0.876” 1.250” 1.750” 1.750” 2.250” ̶̶̶ ̶ ̶ ̶
    Ram End (B): ̶ ̶ ̶ 1.000” 1.250” 1.500” 1.750” 2.000” 2.000” 2.500” 2.500”
N Depth of Ram Hole: 1 ¾” 1 ¾” 1 ¾” 2” 3” 3” 3 ¼” 3” 3” 3” 3”
NN Depth of Ram Pilot Ram End (A) Only: ¼” ¼” ¼” ½” 5/8” 5/8” 5/8” ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶
O Size of Ram Set Screw: ¼” – 28 ¼” – 28 ¼” – 28 3/8” – 16 3/8” – 16 3/8” – 16 ½” – 13 ½” – 13 ½” – 13 ½” – 13 5/8” – 11
P Projection of Ram: 1” 1” 1” 1 ½” 1 ½” 1 ½” 1 ½” 1 ½” 1 ½” 1 ½” 1 ½”
Q Bolt Circle Ram End (B) Only: ̶ ̶ ̶ 2 ¼” 2 5/8” 3 ½” 4” 5” 5” 6 ¼” 7 ¾”
R Tapped Hole Size Ram End (A): 7/8”-9NC2 7/8”-9NC2 7/8”-9NC2 1”-14NF2 1 ½”-12NF2 1 ½”-12 2”-8 ̶ ̶ ̶ ̶
    Ram End (B): ̶ ̶ ̶ ½”-13 5/8”-11 ¾”-10 ¾”-10 1”-8 1”-8 1”-8 1”-8
S Number of Tapped Holes Ram End (A): 1 1 1 1 1 1 1 ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶
    Ram End (B): ̶̶̶ ̶̶̶ ̶̶̶ 4 4 4 4 4 4 4 4
  Overall & Mounting
T Base Width: 18” 19” 19” 26” 26” 28” 29” 32” 32” 36” 36”
U Base Depth: 34 ½” 36” 41” 46” 46” 63” 65” 63” 70” 79” 86”
V Overall Height: 87” 91” 97” 103” 103” 106 ¾” 108” 123 ¾” 123 ¾” 124 ¼” 139
W Mounting Dimensions: 17” 18” 18” 24” 24” 26” 27” 29” 29” 32” 34”
X Mounting Dimensions: 2” 2” 2” 4” 4” 4” 4” 4” 6” 6” 6”
Y Mounting Dimensions: 30 ½” 32” 37” 38” 38” 55” 57” 55” 58” 67” 74”
Z Mounting Hole Diameter (4): 9/16” 9/16” 9/16” 7/8” 7/8” 7/8” 7/8” 1-1/8” 1-1/8” 1-3/8” 1-3/8”
AA Centerline of Ram to Front of Base: 3” 3” 4” 5” 5” 9” 9” 9” 9” 9” 9”
BB Centerline of Ram to Front of Table: 7” 7” 8” 9” 9” 12” 12” 12” 12” 12” 12”
CC Centerline of Ram to Front Cross Member: 3 ¾” 3 ¾” 4 ¾” 5” 5” 8 ¾” 8 ½” 8 ½” 8 ½” 8 ½” 8 ½”
DD Centerline of Ram to Rear Cross Member: 14” 14 ¾” 14 ¾” 17 ½” 17 ½” 20” 20” 20” 20” 22” 24”
EE Distance Between Side Plates: 14” 14 ¾” 14 ¾” 17 ½” 17 ½” 20” 20” 20” 20” 22” 24”
  Approximate Weight in Pounds: 2,100 2,300 2,900 4,700 5,000 7,000 7,900 11,000 14,000 17,000 21,000
  Pump, Motor, & Speed Selections
  Standard Speed  
  Pump (GPM): 3 6 8 12 18 24 24 48 or 12 48 or 12 48 or 12 48 or 12
  Motor Speed (RPM): 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800
  Motor (HP): 5 5 7 ½ 10 15 20 20 15 15 15 15
  Speeds Advance (IPM): 295 419 344 266 318 284 235 291 291 198 143
    Feed (IPM): ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶ 143 143 99 73
    Press (IPM):
    Return (IPM)
  Motor Speed (RPM): 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800
  Fast Speed (Optional)  
  Pump (GPM): 8 12 8 24 30 or 8 48 or 12 48 or 12 80 or 20 80 or 20 80 or 20 80 or 20
  Motor Speed (RPM): 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800
  Motor (HP): 7 ½ 10 15 20 10 15 15 25 30 30 30
  Speeds Advance (IPM): 700 815 805 580 595 570 470 487 487 331 238
    Feed (IPM): ̶̶̶ ̶̶̶ ̶̶̶ ̶̶̶ 264 291 223 239 239 166 121
    Press (IPM): 344 308 314 284 66 71 54 60 60 41 31
    Return (IPM) 675 496 516 555 475 595 422 470 470 331 248
Additional speed selections are available upon request.  Motor sizes listed below do not permit holding under pressure for more than three seconds.  Circuit modifications for longer dwell cycles are available to suit the application.

C Frame Floor Press Open Gap Frame Hydraulic Press (OGF Press) Floor Mounted Hydraulic Press Open Gap Frame Press (OGF Press) Open Gap Frame Hydraulic Press (OGF Press)