|PRESS FEATURE AND SPECIFICATIONS:
This press has extra long guide bushings to reduce platen tilt, which controls platen parallelism.The platen bushings are precision in-lined bored and fitted to posts to assure smooth platen movement.The Hydraulic lines are clamped for control of shock vibration to reduce stresses in the lines. Pipes are butt welded to reduce leaks.
Capacity at 2550 PSI: 100 Tons; Stroke of platen (Adjustable): 20”; Bed to platen, platen up (Daylight): 33”
Welded steel construction – the bed, platen and crown are heavily ribbed welded steel construction
and fully thermal stress relieved and shot blasted prior to maximum stability.
The platen and bed are designed for .002 inch of deflection per foot of R-L span based on full
tonnage uniformly loaded over 2/3 of the distance of the useable bed.
Tie rods are hard chrome plated for rod protection and smooth platen movement.
Light Curtain (Banner) mounted across the front and back of press with bolt on expanded metal guards on
each side (44” long).
AVERAGE SPEEDS, APPROXIMATE: (Position Shift Differential)
Advance: 291 IPM; Press: 65 IPM; Return: 280 IPM; Approximate cycle time – Based on a 9” fast advance speed, 1” press speed, a 10” return speed is 5 seconds.
Pumps: Constant delivery vane pump and a piston pump.
Manifold mounted valves with indicator lights on directional valves.
200-gallon reservoir, floor mounted.
Remote relief valve to manually adjust tonnage of the press.
Over temperature switch (Alarm through HMI); Low oil level switch (Alarm through HMI)
Platen balance and decompression circuit.
Water to oil heat exchanger with water regulating valve.
Return line filter with mechanical indicator.
Hydraulic lines are clamped for control of shock vibration to reduce stresses in the lines.
CONTROLS: PB-6 Circuit, Position Shift Differential
Control cabinet NEMA-12 dust proof and oil tight.
Allen-Bradley electrical components; Allen Bradley Compact Logix programmable controller; Allen Bradley panel view 1000 plus HMI.
LVDT for ram position control through HMI.
Stack light (red, yellow, green); Audible horn (could be added to stack light); E-Stop on front and back of press.
40 HP, 1200 RPM, TEFC frame wired for 230/460 Volts, 3 Phase, 60 Hertz .